Welcome To BarracudaStudios
Acceptance Mark
Don’t have a PayPal account?
Want to pay by credit card?
No Problem!

Home » BarracudaCast » All Products

 Checkout

« Previous | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | Next »

BC-S48001 Lightning F1/F1A/F2/F3 Stencils - 1/48 Scale
BC-S48001 Lightning F1/F1A/F2/F3 Stencils - 1/48 Scale

Details 

This sheet provides complete stencils for the listed variants of the English Electric (BAC) Lightning. They are sharper, cleaner, thinner replacements for the stencils found on the Airfix Lightning's decal sheet. It's a quick, easy upgrade for the otherwise beautiful Airfix Lightning kit.
Price: $7.95
Out of Stock

BM48052 EE Lightning Dialectric Panel Masks
BM48052 EE Lightning Dialectric Panel Masks

Details 

Use this mask to paint the dielectric panel on the spine of the Airfix 1/48 E.E. Lighting. You can use this mask it two ways. You can either paint the panel first and mask it with the positive mask, or paint the aircraft first and then mask the panel with the negative surround mask. This set contains two masks, but if you’re real sneaky, you can paint four models. This is just between you and me, OK?
Price: $2.95
 

BR24200 Hawker Typhoon Mk. Ib Seat with No Belts
BR24200 Hawker Typhoon Mk. Ib Seat with No Belts

Details 

Accurate, detailed one piece resin seat with detailed backpad complete with stitching. Seat has added detail such as seams, rivets, strengthening plates and ribs, thinned edges for scale look, and leather guard in the seatpan. The seat is the most visible part of any cockpit. A quick and easy upgrade. Master patterns by Roy Sutherland
Price: $9.95
 

BR24201 Typhoon Late Style Mainwheels
BR24201 Typhoon Late Style Mainwheels

Details 

NEW!

These new resin mainwheels replace the kit wheels. These new wheels feature more and crisper hub detail, as well as full tire beading, logos and data on the tyre sidewalls. There one piece castings avoid fit problems of multi-part wheels; a simple and quick upgrade for your large scale Tiffie. Late style wheels were fitted to all Bubbletop Typhoons and all but early production Cardoor Tiffies.

Price: $12.95
 

BR24202 Typhoon Carburettor Intake Ring
BR24202 Typhoon Carburettor Intake Ring

Details 

NEW!

This new resin intake ring directly replaces the kit part, which is well done, but has incorrect spacing between the intake tube and the outer ring due to mold tooling limitations. Our ring is properly proportioned, as well as being thinner and more scale looking. A drop fit installation that will make a nice difference in the finished model. Pattern by Kerry Carlyle.

Price: $6.95
 

BR24204 Typhoon Mk. Ib Seat with Belts
BR24204 Typhoon Mk. Ib Seat with Belts

Details 

Contains a one piece resin seat with much extra detail such as rivets, seams, strengthening plates and ribs and leather guard. Seat also features a molded-in accurate late war Q-style harness. The harness is molded in high relief with a slight undercut to make painting a pleasure. As fitted to most later production Bubbletop Typhoons. Master patterns by Roy Sutherland
Price: $10.95
 

BR24208 Hawker Typhoon Pilot
BR24208 Hawker Typhoon Pilot

Details 

NEW!

Beautifully realized by respected sculptor Mike Good, and representing a mid to late war RAF fighter or fighter-bomber pilot, this new figure is a perfect for the new Airfix 24th scale Typhoon Mk Ib. Will also work for the Mosquito or later Mark Spitfires as well.

Price: $25.95
 

BR24278 Golden Arrow Land Speed Record Car Wheels
BR24278 Golden Arrow Land Speed Record Car Wheels

Details 

NEW! 1:24 Scale

This set consists of 4 detailed resin wheels for the Irving Napier land speed car that set a record of 231 mph in 1929. The Profil24 kit, which these are designed for, has wheel castings that are very rough, and you could spend hours on each one and not get them to look anywhere as good as these! A esoteric product for sure, but if you have this kit, you NEED these wheels! I'm told they could be used on other land speed cars of the time. Wheels are 40mm in diameter.

Master patterns by Mike O'Hare.

Price: $21.95
 

BR24281 De Havilland Mosquito Late Mainwheels
BR24281 De Havilland Mosquito Late Mainwheels

Details 

1:24 Scale

These new resin wheels are a huge upgrade to the soon to the Airfix Mosquito in 1/24th scale. They represent the late, dual brake style wheel fitted to all but the early B. Mk IVs and NF IIs, and feature detailed and accurate tread pattern, hub detail and tire data. The Airfix kit is very nice, but the wheels are poor, with monster truck style tread on the vinyl tires. A quick and easy upgrade.

Price: $15.95
 

BR24295 Bf-109G-10 and BF109K-4 Wheels
BR24295 Bf-109G-10 and BF109K-4 Wheels

Details 

NEW! 1:24 Scale

This set consists of a pair of super detailed, accurate resin mainwheels as fitted to some Bf 109G-10 and most K-4 series aircraft. These wheels represent the the wide, smooth tire fitted to the plain hub. Finely rendered raised sidewall ribbing and tire data are featured. Designed to replace the kit wheels, which are not very accurate and have vinyl tires, in the 1/24th Bf 109G-10 and K-4 kits from Trumpeter. Also replaces the mainwheels for the He-162, if and when someone releases one in this scale.

Master patterns by Gunnar Jansson

Price: $12.95
 

BR32001 Spitfire Seat with Leather Backpad
BR32001 Spitfire Seat with Leather Backpad

Details 

This set contains one resin cast seat with molded in leather backpad to directly replace the kit seat in the Tamiya Spitfire releases of the Mk VIII, Mk. IX and the Mk. XVI. The seat also features rivets and drain holes for added realism. Will also upgrade all other 1/32nd Spitfire models, such as the Hasegawa Mk V and the PCM Mk IX.

Price: $7.95
 

BR32002  Spitfire Cockpit Door with Separate Crowbar
BR32002 Spitfire Cockpit Door with Separate Crowbar

Details 

This set consists of a new resin cast cockpit door with separate crowbar that actually fits into the door's clips. Detailed down to the door latch springs, this little part is highly visible, so all that added detail really pays off. Will also upgrade all other 1/32nd Spitfire models, such as the Hasegawa Mk V and the PCM Mk IX.
Price: $5.95
 

BR32003 Spitfire Cockpit Upgrade Set - Revised
BR32003 Spitfire Cockpit Upgrade Set - Revised

Details 

Replaces the Tamiya kit parts for the control column, throttle quadrant, retract quadrant and compass with more detailed resin pieces. An oxygen hose is also included, and the set is completed with the inclusion of a revised and expanded sheet of stencil and placard decals for the cockpit, including a correct WWII type artificial horizon and direction indicator, as well as a more standard compass. The revision adds about 7 more stencils including the remote contactor (found in set 32008), door stencils, oxygen cylinder, etc. The decals also include a correct WWII type artificial horizon and direction indicator, as well as a more standard compass. The control column is predrilled to accept the included fine black wire to simulate the 3 pneumatic lines. Will also upgrade all other 1/32nd Spitfire models, such as the Hasegawa Mk V and the PCM Mk IX.

Price: $8.95
 

BR32004 Spitfire IX Rocker Covers with Logos
BR32004 Spitfire IX Rocker Covers with Logos

Details 

Directly replaces the beautiful Tamiya kit rocker covers for the two Stage Merlin 60 series engine with new resin covers that feature the much sought after Rolls-Royce logo plates molded on. A simple detail upgrade for the engine compartment.
Price: $7.95
 

BR32005 Spitfire 5-Slot Mainwheels
BR32005 Spitfire 5-Slot Mainwheels

Details 

As fitted to Spitfires Mk. I through the early Mk. IX. The 5 slot wheels in the Tamiya kit are superb, but the soft rubber tyres (British spelling for a British aircraft!) have a mold parting line that is very difficult to get rid of, plus they have a natural tendency to attract every piece of dirt and lint in the room. They need to be cleaned frequently. Replacing them with resin wheels cures these problems, plus it allows you to paint the tyres, and they will not split or crumble years from now. Replaces the inaccurate and oversized wheels in the Hasegawa and PCM kits as well.
Price: $8.95
 

BR32006 Spitfire 4-Slot Mainwheels
BR32006 Spitfire 4-Slot Mainwheels

Details 

As fitted to the Spitfire Mk. IX through Mk. XIX. The 4 slot wheels in the Tamiya kit are superb, but the soft rubber tyres have a mold parting line that is very difficult to get rid of, plus they have a natural tendency to attract every piece of dirt and lint in the room, and they need to be cleaned frequently. Replacing them with resin wheels cures these problems, plus, it allows you to paint the tyres, and they will not split or crumble years from now. Replaces the inaccurate and oversized wheels in the PCM kits as well.
Price: $8.95
 

BR32007 Spitfire Gun Covers with Wide Blister
BR32007 Spitfire Gun Covers with Wide Blister

Details 

The wide blister C wing gun covers in the Tamiya kit are very nice, but the cannon fairing blisters are too square in the front. This set directly replaces the kit's upperwing gun covers with more rounded resin castings. A simple way to accurize your early Spit Mk IX.
Price: $7.95
 

BR32008 Spitfire Starboard Cockpit Sidewall
BR32008 Spitfire Starboard Cockpit Sidewall

Details 

Designed to replace the kit lower sidewall for the Tamiya Spitfire VIII, IX, and XVI. This set also includes the missing remote contactor. The new resin sidewall has been molded with all the complex plumbing of the windscreen de-icer system, as well as the oxygen line. A number of other details have been added including new stringers with hollowed out ends and additional electrical wiring. The remote contactor, missing in the Tamiya kit, was fitted to all Spitfires until well into 1944. Full color detailed installation instructions round out this new set. This set can be modified to fit into any 1/32nd scale Spitfire kit, as the port sidewall remained virtually the same from Spitfire Mk. I through the Mk. 24, and all Seafire variants. Pattern by Roy Sutherland.
Price: $8.95
 

BR32009 Spitfire Z-Block 5 Spoke Mainwheel
BR32009 Spitfire Z-Block 5 Spoke Mainwheel

Details 

This treaded tire was fitted to Australian Mk. V Spitfires, and any other Spitfire with 5 slot wheels that needed additional traction due to harsh operating conditions. This style of tread was referred to a Z-block, for the distinctive Z shaped tread blocks that wrapped onto the side walls. The tread pattern has been accurately depicted, including the narrow ribs that connected the blocks. A great looking pair of wheels that will set your Spitfire model apart. Designed for the Hasegawa and Hobby Boss Spitfire V kits. Pattern by Lee Coll and Roy Sutherland.
Price: $8.95
 

BR32010 Spitfire Z-Block 4 Spoke Mainwheel
BR32010 Spitfire Z-Block 4 Spoke Mainwheel

Details 

This treaded tire was fitted to Australian Mk. VIII Spitfires, and any other Spitfire with 4 slot wheels that needed additional traction due to harsh operating conditions. This style of tread was referred to a Z-block, for the distinctive Z shaped tread blocks that wrapped onto the side walls. The tread pattern has been accurately depicted, including the narrow ribs that connected the blocks. A great looking pair of wheels that will set your Spitfire model apart. Designed for the Tamiya and Pacific Coast Models Spitfire VIII kits. Pattern by Lee Coll and Roy Sutherland.
Price: $8.95
 

« Previous | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | Next »

home | search | checkout | email

All text and graphics Copyright © 2017 Barracuda Studios, except where otherwise noted.