Welcome To BarracudaStudios
Acceptance Mark
Don’t have a PayPal account?
Want to pay by credit card?
No Problem!

Home » BarracudaCast » 1/48 Scale Resin Detail Sets

 Checkout

« Previous | 1 | 2 | 3 | 4 | Next »

BR48218 DH Hornet / Sea Hornet Droptanks
BR48218 DH Hornet / Sea Hornet Droptanks

Details 

NEW!

Accurate, super detailed streamlined drop tanks fitted to all marks of the Hornet & Sea Hornet. Tanks are handed as they were on the real aircraft. Fits Trumpeter, Classic Airframes and Dynavector kits.

Price: $8.95
 

BR48235 B-1B Engine Intake Set
BR48235 B-1B Engine Intake Set

Details 

NEW! 1:48 Scale

This set contains a pair of accurate resin cast intake fairings to replace the poorly shaped and basic kit intakes. These new intakes feature the auxiliary intake lips molded in the extended position, as they were frequently seen on the ground. Also included are 4 beautifully detailed intake covers that accurately capture the look of these flexible covers stuffed into the intakes. These covers frequently were painted with a/c numbers and sometimes had colorful unit badges on the as well. For the Revell B-1B kit.

Intake cover design by Vincent Chmielewski.

Price: $22.95
 

BR48236 B-1B Early Exhausts - with Turkey Feathers
BR48236 B-1B Early Exhausts - with Turkey Feathers

Details 

NEW! 1:48 Scale

This set consists of four complete, super detailed early exhaust assemblies. The first B-1Bs were fitted with turkey feathers covering the exhausts. Early in the program, it was found that vibration problems were splitting and breaking them, so they were removed from all subsequent Bones. This set contains rear engine faces with flame holders, exhaust tubes and covered exhaust nozzles, and allows you to build a super detailed early B-1B. Quick and easy to install with simple, clear instructions. For the Revell B-1B kit.

Price: $33.95
 

BR48237 B-1B Late Exhausts - No Turkey Feathers
BR48237 B-1B Late Exhausts - No Turkey Feathers

Details 

NEW! 1:48 Scale

This set consists of four complete, super detailed late exhaust assemblies. The first B-1Bs were fitted with turkey feathers covering the exhausts. Early in the program, it was found that vibration problems were splitting and breaking them, so they were removed from all subsequent Bones. This set contains rear engine faces with flame holders, exhaust tubes, exposed exhaust nozzles and 54 separate radius rods that allows you to build a super detailed late B-1B. Surprisingly easy assembly that yields a very detailed model. Complete with instructions. For the Revell B-1B kit.

Price: $35.95
 

BR48238  B-1B Main and Nose Wheel Set
BR48238 B-1B Main and Nose Wheel Set

Details 

NEW! 1:48 Scale

Contains a complete set of accurate and detailed wheels for the B-1B: 2 nose wheels and 8 main wheels superbly cast in resin to improve and replace the problematic rubber/plastic tire assemblies supplied in the kit. A real upgrade over the kit wheels. Designed for the Revell B-1B kit.

Price: $27.50
 

BR48239  B-1B External Upgrade Set
BR48239 B-1B External Upgrade Set

Details 

NEW! 1:48 Scale

This Upgrade kit contains a number of parts necessary to allow you to build any of the more modern B-1B configurations. The Revell kit, built out of the box, only allows you to build early B-1Bs. Included are accurate, detailed resin parts consisting of 2 towed decoy fairings, the late DAS fairing mounted on the bottom of the rear fuselage, as well as a selection of AN/ALQ-161 and early DAS blade antennas not supplied in the kit. Detailed installation instructions. For the Revell B-1B kit.

Price: $15.95
 

BR48242 F8F-1 Bearcat Mainwheels
BR48242 F8F-1 Bearcat Mainwheels

Details 

Accurate early mainwheels with diamond tread tires and slotted hubs on F8F-1s, including French AF and Blue Angels. Fits all Bearcat kits. 1:48 scale. Master patterns by Michael O'Hare

Price: $6.95
 

BR48243 F8F-2 Bearcat Late Mainwheels
BR48243 F8F-2 Bearcat Late Mainwheels

Details 

Accurate late style mainwheels with ribbed tires and cast hubs fitted to F8F-2s, including USN, USMC, most Warbirds and Air Racers. Fits all Bearcat kits. 1:48 scale. Master patterns by Michael O'Hare

Price: $6.95
 

BR48259 British WWI Wicker Seat - No Belts
BR48259 British WWI Wicker Seat - No Belts

Details 

NEW! 1:48 Scale

Set contains two super detailed 1:48 scale wicker seats that were sometimes installed in a number of WWI British aircraft. Sopwith Camel, Pup, Triplane, S.E.5, DH.2, R.E.8, and more. They were a special order item from a catalog, and were well liked by RFC pilots. Master patterns by Michael O'Hare.

Price: $6.95
 

BR48260 British WWI Wicker AGS Seats - No Belts
BR48260 British WWI Wicker AGS Seats - No Belts

Details 

NEW! 1:48 Scale

Two different super detailed 1:48 scale wicker seats that could be installed in a number of WWI British aircraft. Sopwith Camel, Pup, Triplane, S.E.5, DH.2, R.E.8, and more. They were a special order item from a catalog, and were well liked by RFC pilots. The low back seat was typically the pilot's seat and the high back one was for observers/gunners. Master patterns by Michael O'Hare.

Price: $6.95
 

BR48261 Grumman Guardian AF-2S/W Mainwheels
BR48261 Grumman Guardian AF-2S/W Mainwheels

Details 

The Special Hobby Grumman Guardian kits are very nice, but the wheels are lacking in detail and are incorrect in having eight instead of six spokes in the hubs! Our new, beautifully detailed resin wheels were designed by Lee Coll based on careful measurements and photos he took of the Guardian at Pensacola. Note that the Guardian and early Tracker wheels are the same wheel. A quick and easy upgrade.
Price: $7.95
 

BR48270 RAF Mid-Late WWII Fighter Pilot
BR48270 RAF Mid-Late WWII Fighter Pilot

Details 

Sculpted by the master of epoxy putty, Mike Good! This European theatre RAF fighter or fighter/bomber pilot is wearing late war flight gear, and is preparing for his next mission by buckling the strap on his flight helmet. Perfect for Typhoons, Spitfires, Tempests, Mosquitos, Meteors, even RAF P-47s and P-51s! Easy assembly and full instructions.
Price: $11.95
 

BR48279 Grumman Tracker Early Mainwheels
BR48279 Grumman Tracker Early Mainwheels

Details 

The Kinetic Grumman Tracker kits come with late style main wheels as fitted to all Trackers after the retrofit to upgrade the brakes was completed in the 1970s. Before that, all Trackers were fitted with these early style wheels. Available for the first time in 1/48th scale, Barracuda Studios' wheels are nicely detailed, accurate and easy to install. A must have for Trackers in service markings before the mid 1970s. Note that the Guardian and early Tracker wheels are the same wheel.

Designed by Lee Coll.

Price: $7.95
 

BR48289 MiG-25 Foxbat Main and Nose Wheels
BR48289 MiG-25 Foxbat Main and Nose Wheels

Details 

NEW! 1:48 Scale

This set contains 2 detailed, accurate main and nose wheels fitted to all versions of the Foxbat. The new mainwheels are molded with see-through spokes and separate brake units. Wheels feature detailed hubs, tires with prototypical tread, fine raised ribbing and tire data. For the Kitty Hawk and other MiG-25 kits.

Master patterns by Mike O'Hare

Price: $10.95
 

BR48290 MiG-25 Interceptor (Short) Exhausts
BR48290 MiG-25 Interceptor (Short) Exhausts

Details 

NEW! 1:48 Scale

Contains 2 detailed, accurate exhaust and afterburner assemblies for the Tumansky R-15 engines fitted to interceptor versions of the Foxbat. The kit exhausts are the wrong type for the Interceptor variants. There is a bit of work necessary to install them, but its all described in detail in the instructions, and is a huge detail upgrade for the Kitty Hawk kit.

Master patterns by Mike O'Hare

Price: $23.95
 

BR48292 MiG-25PD/PDF Foxbat Nose correction
BR48292 MiG-25PD/PDF Foxbat Nose correction

Details 

NEW! 1:48 Scale

Contains an accurate, detailed forward fuselage and radome to replace the inaccurate nose for the PD/PDS versions as supplied in the Kitty Hawk kit. These parts and beautifully scribed and actually fit the kit (crazy talk, I know!) and make a great improvement in the look of the finished model.

Master patterns by Mike O'Hare

Price: $15.95
 

BR48294 MiG-21 Radome Set
BR48294 MiG-21 Radome Set

Details 

NEW! 1:48 Scale

Designed for the superb Eduard MiG-21 series. The kit radome is accurate and well molded. The problem is that you have to paint and install it before you assemble the fuselage halves. Our separate radome and bulkhead allow you to assemble the fuselage without the radome, which is then installed when the model is almost finished. This will allow you to fill and sand the intake seams, and paint the intake and radome separately. You can also use the intake as a receptacle for a handle that will allow you to hold the model firmly while painting it. It also removes the possibility of damaging the radome point during assembly and painting. Quick and easy... problems solved!

Master Pattern by Lee Coll.

Price: $5.95
 

BR48304 Meteor Mk. 8 Main and Nose Wheel Set
BR48304 Meteor Mk. 8 Main and Nose Wheel Set

Details 

NEW! 1:48 Scale

Contains new resin wheels with detailed hubs, accurate tread, tire data and logos. Designed to fit the Airfix Meteor Mk 8. These wheels were also fitted to all later marks. Can be modified to upgrade the Classic Airframes and Aeroclub Meteor kits.

Master patterns by Mike O'Hare

Thanks to Steve Long and the Camden Museum of Aviation for the help in researching these wheels.

Price: $8.95
 

BR48308 Boulton Paul Defiant Mainwheels and Tailwheel
BR48308 Boulton Paul Defiant Mainwheels and Tailwheel

Details 

NEW! 1:48 Scale

Super detailed, accurate main wheels featuring subtle tire beading, logos and sharp hub detailing. Set includes separate wheel brushes and greatly refined tailwheel to replace kit parts in new Airfix kit. Can also be fitted to the Classic Airframes kit.

Price: $7.95
 

BR48317    Spitfire Four Slot Mainwheels
BR48317 Spitfire Four Slot Mainwheels

Details 

NEW! 1:48 Scale

This set contains a pair of detailed 4 slot mainwheels with accurate hub detail, subtle tire beading & data. The tyre is smooth; by far the most common tire seen on Spitfires. For Mk VII thru 21 Spitfires operation from grass or dirt runways. Also fitted to some Seafire kits. These wheels are designed to fit the superb Eduard Spitfire VIII, IX and XVI, but include axle adapter inserts so they can be fit to all other kits. Full 24" diameter (actual diameter .5" or 12.7mm).

Designed by Mike O'Hare.

Price: $7.50
 

« Previous | 1 | 2 | 3 | 4 | Next »

home | search | checkout | email

All text and graphics Copyright 2017 Barracuda Studios, except where otherwise noted.