Welcome To BarracudaStudios
Acceptance Mark
Don’t have a PayPal account?
Want to pay by credit card?
No Problem!

Home » All P-51 Mustang

 Checkout

ADH016 How To Build Tamiya's 1:32 P-51D Mustang
ADH016 How To Build Tamiya's 1:32 P-51D Mustang

Details 

The complete guide to building Tamiya's amazing 1:32 P-51D written by Brett Green, creator of the premiere modelling website Hyperscale and editor of Model Military International magazine. This new book features an exhaustive step-by-step guide to construction plus models by Brett Green, Mark Glidden and Roy Sutherland. Hundreds of images of models under construction, plus close up photos of surviving Mustangs show you how to get the very best from your model. This book is a must have before you start work on your model! Also featured are lists of after market parts and decals already available for Tamiya’s Mustang.
Price: $24.99
Out of Stock

BC32009 P-51D Mustangs - Part 1 - 1/32 Scale
BC32009 P-51D Mustangs - Part 1 - 1/32 Scale

Details 

P-51D-20-NA Mustang “Double Trouble Two” 353rd Fighter Group, 352nd Fighter Squadron, 8th Air Force Flown by Lt. Colonel “Wild” Bill Bailey. Raydon Airfield, England,1944-45.

P-51D-15-NA Mustang “The Millie G” 55th Fighter Group, 343rd Fighter Squadron, 8th Air Force Flown by Major Edward Giller. Wormingford Airfield, England,1944-45.

P-51D-15-NA Mustang “Amorous Len III” 357th Fighter Group, 363rd Fighter Squadron, 8th Air Force Flown by Captain Reager. Yoxford Airfield, England, 1944-45.

P-51D-5-NA Mustang “Lou IV” 361st Fighter Group, 375th Fighter Squadron, 8th Air Force Flown by Lt. Col. Thomas Christian. Bottisham Airfield, England, summer 1944.

P-51D-15-NA Mustang “Alabama Rammer Jammer” 353rd Fighter Group, 352nd Fighter Squadron, 8th Air Force< Flown by Lt. Arthur Cundy. Raydon Airfield, England, Spring 1945.

Price: $13.95
Out of Stock

BC32010 P-51D Mustang Cockpit Stencils and Placards - 1/32 Scale
BC32010 P-51D Mustang Cockpit Stencils and Placards - 1/32 Scale

Details 

This sheet provides a complete set of stencils and placards for the cockpit of the P-51D. Over 100 tiny decals recreate the extensive markings found in the cockpit, from the North American Data Plates down to the tiny PULL marking on the droptank release handle. Instrument faces are not included, but everything else is. Even the battery and radios behind the seat bulkhead are covered in this set. Most stencils are readable and accurately recreate the real markings. A simple but spectacular upgrade for the Mustang's large and highly visible cockpit. Designed for the Tamiya kit, but will work with just about any 1/32nd scale P-51D.
Price: $7.95
 

BC48011 P-51D Mustangs - Part 1 - 1/48 Scale
BC48011 P-51D Mustangs - Part 1 - 1/48 Scale

Details 

P-51D-20-NA Mustang “Double Trouble Two” 353rd Fighter Group, 352nd Fighter Squadron, 8th Air Force Flown by Lt. Colonel “Wild” Bill Bailey. Raydon Airfield, England,1944-45.

P-51D-15-NA Mustang “The Millie G” 55th Fighter Group, 343rd Fighter Squadron, 8th Air Force Flown by Major Edward Giller. Wormingford Airfield, England,1944-45.

P-51D-15-NA Mustang “Amorous Len III” 357th Fighter Group, 363rd Fighter Squadron, 8th Air Force Flown by Captain Reager. Yoxford Airfield, England, 1944-45.

P-51D-5-NA Mustang “Lou IV” 361st Fighter Group, 375th Fighter Squadron, 8th Air Force Flown by Lt. Col. Thomas Christian. Bottisham Airfield, England, summer 1944.

P-51D-15-NA Mustang “Alabama Rammer Jammer” 353rd Fighter Group, 352nd Fighter Squadron, 8th Air Force< Flown by Lt. Arthur Cundy. Raydon Airfield, England, Spring 1945.

Price: $11.95
Out of Stock

BC72009 P-51D Mustangs - Part 1 - 1/72 Scale
BC72009 P-51D Mustangs - Part 1 - 1/72 Scale

Details 

P-51D-20-NA Mustang “Double Trouble Two” 353rd Fighter Group, 352nd Fighter Squadron, 8th Air Force Flown by Lt. Colonel “Wild” Bill Bailey. Raydon Airfield, England,1944-45.

P-51D-15-NA Mustang “The Millie G” 55th Fighter Group, 343rd Fighter Squadron, 8th Air Force Flown by Major Edward Giller. Wormingford Airfield, England,1944-45.

P-51D-15-NA Mustang “Amorous Len III” 357th Fighter Group, 363rd Fighter Squadron, 8th Air Force Flown by Captain Reager. Yoxford Airfield, England, 1944-45.

P-51D-5-NA Mustang “Lou IV” 361st Fighter Group, 375th Fighter Squadron, 8th Air Force Flown by Lt. Col. Thomas Christian. Bottisham Airfield, England, summer 1944.

P-51D-15-NA Mustang “Alabama Rammer Jammer” 353rd Fighter Group, 352nd Fighter Squadron, 8th Air Force< Flown by Lt. Arthur Cundy. Raydon Airfield, England, Spring 1945.

Price: $9.95
Out of Stock

BR32012 P-51D Mustang Cockpit Sidewalls
BR32012 P-51D Mustang Cockpit Sidewalls

Details 

This set consists of new super detailed, accurate resin sidewalls, which replace the Tamiya kit parts. Many handles and levers have been molded separately to ease painting and improve accuracy. A fret of photoetched parts rounds out this set, and it includes a number of cockpit details such as canopy rails, rudder pedal inserts, bomb salvo handles and new breather plates. These sidewalls may be adapted to fit other 1/32 Mustang kits such as the old Hasegawa kit and the newer Dragon kits, and will be a noticeable improvement over the kit parts.
Price: $13.95
 

BR32013 P-51D Mustang Instrument Panel
BR32013 P-51D Mustang Instrument Panel

Details 

The Tamiya kit instrument panel is replaced with a mixed media parts featuring a resin main panel with improved knobs and switches. The main instrument panel has been replaced with a multi-part photoetched assembly with readable and authentic film dials. The instrument bezels have been etched separately in order to get the full relief not possible in single part panels. This is a little extra work, but the results will be worth it! Photoetched ring and bead site parts are included. Designed for the Tamiya kit, but can be modified to fit other Mustang kits.
Price: $12.95
 

BR32014 P-51D Mustang Cockpit Upgrade
BR32014 P-51D Mustang Cockpit Upgrade

Details 

This upgrade set contains a number of cockpit components that benefit from being produced in resin, allowing more accurate and detailed parts for your P-51 Mustang's cockpit. Fully detailed radio and batteries come complete with a battery wiring diagram. The radio includes resin wiring harness parts. The throttle quadrant is new, and comes complete with two throttle levers, the early and late style with Belden cable mounting. Our stick has much new detail on it, and the set is rounded out by a much more detailed and accurate K-14 Gunsight with its special mounting bracket. Designed for the Tamiya kit, but can be modified to fit other Mustang kits.
Price: $9.95
 

BR32016 P-51D Mustang Paper Droptanks
BR32016 P-51D Mustang Paper Droptanks

Details 

Super-detailed, seamless nose and tailcones for Tamiya’s 108 gallon drop tanks capture the rough, scalloped look of the paper mache. The paper drop tanks in the Tamiya Mustang kit are accurate in shape and size, but they do not capture the "look" of the end caps on the real tanks. The real tanks are made of compressed, impregnated paper. The nose and tail caps were laid up with paper mache style strips and have a slight ribbed effect with a rough surface texture. Tamiya's kit parts are smooth with even spaced radial lines scribed around them. While designed specifically for the Tamiya kit, the Barracuda Studios parts can be used with the Dragon 1/32 P-51D.
Price: $9.95
 

BR32029 - P-51 Mustang Diamond Tread Tires
BR32029 - P-51 Mustang Diamond Tread Tires

Details 

This set contains new, more accurate diamond tread tires that directly replace the tires in the Tamiya kit. The problem with the soft vinyl tires in the kit is that the seams are very difficult to remove, and they tend to attract dirt and dust. These seamless resin parts have superb tread detail, and are both sandable and paintable. Four styles are available, and you can even mix and match them, as was common practice on the real aircraft. For modelers building a P-51A,B,C,D or K from Hasegawa, Trumpeter, Dragon, Hobbycraft or Monogram, you will need our resin wheel hubs 32034 as well.
Price: $7.95
 

BR32030 - P-51 Mustang Oval Tread Pattern Tires
BR32030 - P-51 Mustang Oval Tread Pattern Tires

Details 

This set contains new oval tread pattern tires that directly replace the tires in the Tamiya kit. The problem with the soft vinyl tires in the kit is that the seams are very difficult to remove, and they tend to attract dirt and dust. These seamless resin parts have superb tread detail, and are both sandable and paintable. Four styles are available, and you can even mix and match them, as was common practice on the real aircraft. For modelers building a P-51A,B,C,D or K from Hasegawa, Trumpeter, Dragon, Hobbycraft or Monogram, you will need our resin wheel hubs 32034 as well.
Price: $7.95
 

BR32031 - P-51 Mustang Octagonal Tread Tires
BR32031 - P-51 Mustang Octagonal Tread Tires

Details 

This set contains new hexagonal tread pattern tires that directly replace the tires in the Tamiya kit. The problem with the soft vinyl tires in the kit is that the seams are very difficult to remove, and they tend to attract dirt and dust. These seamless resin parts have superb tread detail, and are both sandable and paintable. Four styles are available, and you can even mix and match them, as was common practice on the real aircraft. For modelers building a P-51A,B,C,D or K from Hasegawa, Trumpeter, Dragon, Hobbycraft or Monogram, you will need our resin wheel hubs 32034 as well.
Price: $7.95
 

BR32032 - P-51 Mustang Block Tread Tires
BR32032 - P-51 Mustang Block Tread Tires

Details 

This set contains new staggered block tread pattern tires that directly replace the tires in the Tamiya kit. The problem with the soft vinyl tires in the kit is that the seams are very difficult to remove, and they tend to attract dirt and dust. These seamless resin parts have superb tread detail, and are both sandable and paintable. Four styles are available, and you can even mix and match them, as was common practice on the real aircraft. For modelers building a P-51A,B,C,D or K from Hasegawa, Trumpeter, Dragon, Hobbycraft or Monogram, you will need our resin wheel hubs 32034 as well.
Price: $7.95
 

BR32034 - P-51 Mustang Mainwheel Hubs
BR32034 - P-51 Mustang Mainwheel Hubs

Details 

This set contains a pair of accurate resin mainwheel hubs designed to fit our resin tires, for those not building the Tamiya P-51 kit. For modelers building a P-51A,B,C,D or K from Hasegawa, Trumpeter, Dragon, Hobbycraft or Monogram and using our resin tires BR32029, BR32030, BR32031, BR32032. These hubs are not intended for the Tamiya kit, as the mounting to the gearleg is different.
Price: $5.95
 

BR48050 P-51 Mustang Oval Tread Pattern Wheels
BR48050 P-51 Mustang Oval Tread Pattern Wheels

Details 

Two highly detailed and accurate mainwheels with oval pattern tires and see through hubs make up this set. A quick and easy upgrade for A-36 and P-51A, B, C, D, and K model Mustangs. You can see daylight through real Mustang wheel hubs. Now you can recreate this in 1/48th scale.
Price: $6.95
 

BR48051 P-51 Mustang Hexagonal Tread Wheels
BR48051 P-51 Mustang Hexagonal Tread Wheels

Details 

Accurate resin hexagonal tread pattern tires with see-through hubs replace the kit wheels in any 1/48 kit of the A-36 and P-51A, B, C, D and K variants. You can see daylight through real Mustang wheel hubs. Now you can recreate this in 1/48th scale.
Price: $6.95
 


home | search | checkout | email

All text and graphics Copyright © 2017 Barracuda Studios, except where otherwise noted.