Welcome To BarracudaStudios
Acceptance Mark
Don’t have a PayPal account?
Want to pay by credit card?
No Problem!

Home » New Releases

 Checkout

The following discounts apply to all these products.
15% Off Orders of $35 or More
20% Off Orders of $100 or More

« Previous | 1 | 2 | Next »

BC32129 F4U-1 Corsair Cockpit Stencils and Placards
BC32129 F4U-1 Corsair Cockpit Stencils and Placards

Details 

REISSUED DECAL 1:32 Scale

This set contains nearly 50 tiny stencil markings that replicate nearly all of the markings found in the wartime F4U-1, -1A and -1D Corsair cockpits. These markings will really bring the cockpit to life. Not for the faint of heart, but the hours you spend adding these tiny decals will be time well spent. Designed for the Tamiya Corsair kit, but can be adapted to fit all Corsair kits.

Price: $7.95
 

BC48361  P-51D Cockpit Stencils and Placards
BC48361 P-51D Cockpit Stencils and Placards

Details 

NEW! 1:48 Scale

This sheet provides a complete set of stencils and placards for the cockpit of the P-51D. A mass of tiny decals recreate the extensive markings found in the cockpit, from the North American Data Plates down to the tiny PULL marking on the droptank release handle. Instrument faces are not included, but everything else is. Even the battery and radios behind the seat bulkhead are covered in this set. A simple but spectacular upgrade for the Mustang's large and highly visible cockpit. For the Airfix, Meng, Tamiya, ICM or just about any 1/48th scale P-51D kit. While this set contains every stencil and placard found in the real cockpit, not all cockpits have the detail necessary to place them all. It is up to the user to determine which decals to use or not. These are very tiny markings and will require patience and some skill to work with, but the results are worth it!

Designed by Chris Busbridge

Price: $5.95
 

BC48373  Fw-190A,F D Airframe stencils
BC48373 Fw-190A,F D Airframe stencils

Details 

NEW! 1:48 Scale

This set consists of one set of complete stencils for just about any variant of the FW 190 family. These are very thin and beautifully printed by Cartograf, and replace the often thick stencils with hard to hide clear film found in all kits of the Fw-190 in 1/48 scale. A simple upgrade with a big payoff for your latest Wurger project.

Designed by Chris Busbridge

Price: $5.95
 

BC48375  Spitfire Later Marks Airframe Stencils
BC48375 Spitfire Later Marks Airframe Stencils

Details 

NEW! 1:48 Scale

This set consists of one set of complete stencils for Spitfires Mk VII through 24 and Seafires Mk XV through 47. Some factories retained the older stencil style into later marks. Includes cockpit door stencils and bomb markings. These are very thin and beautifully printed by Cartograf, and replace the often thick stencils with hard to hide clear film found in all kits of the marks listed above in 1/48 scale. A simple upgrade with a big payoff for your latest Spitfire build project.

Designed by Chris Busbridge

Price: $5.95
 

BC72376  Fw-190A,F D Airframe stencils
BC72376 Fw-190A,F D Airframe stencils

Details 

NEW! 1:72 Scale

This set consists of two complete sets of stencils for just about any variant of the FW 190 family. These are very thin and beautifully printed by Cartograf, and replace the often thick stencils with hard to hide clear film found in all kits of the Fw-190 in 1/72 scale. A simple upgrade with a big payoff for your latest Wurger project.

Designed by Chris Busbridge

Price: $7.95
 

BC72378  Spitfire Later Marks Airframe Stencils
BC72378 Spitfire Later Marks Airframe Stencils

Details 

NEW! 1:72 Scale

This set consists of two complete sets of stencils for Spitfires Mk VII through 24 and Seafires Mk XV through 47. Some factories retained the older stencil style into later marks. Includes cockpit door stencils and bomb markings. These are very thin and beautifully printed by Cartograf, and replace the often thick stencils with hard to hide clear film found in all kits of the marks listed above in 1/72 scale. A simple upgrade with a big payoff for your latest Spitfire build project.

Designed by Chris Busbridge

Price: $7.95
 

BM72324 B-1B Canopy Masks
BM72324 B-1B Canopy Masks

Details 

NEW! 1:72 Scale

This set contains a sheet of precut Kabuki type tape canopy masks for the Monogram B-1B Lancer kit. Includes masks for both the canopy clear panels and the sealing strips that surround each panel. It also comes with masks for the D-shaped flush DAS antennas that replaced the thick blade antennas located in front of the main gear doors and under the tail. Includes full color illustrated installation instructions.

Price: $5.95
 

BR24325    Bf 109G Wheels - Ribbed Hub, Ribbed Tire
BR24325 Bf 109G Wheels - Ribbed Hub, Ribbed Tire

Details 

NEW! 1:24 Scale

This set contains a pair of super detailed, accurate resin mainwheels as fitted to the Bf 109G-4 thru G-14 series aircraft. This wheel features the ribbed hub and treaded tires, as seen on the vast majority of these Gustavs until later in the war. Replaces the problematic soft vinyl/plastic composite wheels that come with the Trumpeter kits.

Master Patterns by Gunnar Jansson

Price: $12.95
 

BR32319    Spitfire Four Slot Block Tread Mainwheels
BR32319 Spitfire Four Slot Block Tread Mainwheels

Details 

NEW! 1:32 Scale

This set contains a pair of detailed 4 slot mainwheels with accurate hub detail, subtle tire beading & data. The tyre is block tread style (not Z-Block style). Fitted to postwar Mk VII thru 21 Spitfires operating from improved runways and carrier decks. Also installed on some Seafire XV, XVII, 45 and 46. These wheels are designed to fit the superb Tamiya Spitfire VIII, IX and XVI, but include axle adapter inserts so they can be fit to all other kits. Wheels are 24" diameter (actual diameter .75" or 19mm).

Designed by Mike O'Hare.

Price: $8.95
 

BR32329 P-40B/C Main Wheels with Smooth Tire
BR32329 P-40B/C Main Wheels with Smooth Tire

Details 

NEW! 1:32 Scale

This set consists of two super detailed resin main wheels with accurate hub and brake detail, petite tire logo and data detail, as fitted to the P-36, Hawk 81A. P-40B/C and RAF Tomahawk. A simple upgrade for the Trumpeter P-40B kits, replacing the vinyl/plastic wheels in the kit.

These wheels were also fitted to:
Curtiss Hawk 75
USAAC P-36 series fighters
Seversky P-35
Curtiss O-52 Owl
North American O-47
Curtiss P-37 (an interim prototype experiment)
XP-40 (modified from a P-36 airframe)
P-40E with smooth tread tires
Kittyhawk I/Ia with smooth tread tires

Master patterns by Gerry Mos

Price: $8.95
 

BR32332  Sopwith Camel Wicker Seat w Cushion
BR32332 Sopwith Camel Wicker Seat w Cushion

Details 

NEW! 1:32 Scale

This set contains a super detailed resin wicker seat with open weave strip and a choice of both plain leather and tufted 5 button padded seat cushion. This set replaces the kit seat with a very simple modification to the kit floor in the WNW Sopwith Camel. A big visual improvement for a few minutes of easy work. Complete with illustrated instructions.

Designed by Mike O'Hare, Mike Good and Roy Sutherland

Price: $6.50
 

BR32334 Tempest V Nose Correction Set
BR32334 Tempest V Nose Correction Set

Details 

NEW! 1:32 Scale

This set is designed to correct the nose, radiator, prop and spinner on the otherwise superb Special Hobby Tempest V. The problem with the kit nose is that the spinner baseplate diameter is too big by about 2 inches. This throws out the taper of the forward cowling. The radiator opening is also too big. This causes problems with the shape of the radiator housing. The kit spinner has some shape issues, which we have fixed with an all new spinner. The kit prop blades have also been replaced by a more accurate set. The new nose is cast in one piece for ease of installation, and the fine riveted surface detail has been replicated (no easy task!). Set also includes a prop alignment jig and full color, illustrated instructions. A real improvement to the accuracy of an otherwise great kit.

Patterns by Anthony Galbraith, Kerry Carlyle and Roy Sutherland.

Price: $24.95
 

BR32335    Spitfire Four Slot Mainwheels
BR32335 Spitfire Four Slot Mainwheels

Details 

NEW! 1:32 Scale

This set contains a pair of detailed 4 slot mainwheels with accurate hub detail, subtle tire beading & data. The tyre is smooth; by far the most common tire seen on Spitfires. For Mk VII thru 21 Spitfires operation from grass or dirt runways. Also fitted to some Seafire kits. These wheels are designed to fit the brand new Revell Mk IX kit, but can also be fit to the Tamiya Spitfire VIII, IX and XVI. Wheels are 24" diameter (actual diameter .75" or 19mm).

Designed by Mike O'Hare.

Price: $8.95
 

BR32336 Spitfire Mk IX Seat w Backpad & Armor
BR32336 Spitfire Mk IX Seat w Backpad & Armor

Details 

NEW! 1:32 Scale

This set contains an accurate standard Tufnol composite Spitfire seat with detailed leather backpad and armor plate (missing from the kit) to replace the inaccurate seat in Revell’s Mk IX kit.

Master patterns by Roy Sutherland

Price: $7.95
 

BR32338 Spitfire Mk IX Cockpit Door w Crowbar
BR32338 Spitfire Mk IX Cockpit Door w Crowbar

Details 

NEW! 1:32 Scale

This set contains a super detailed, accurate Spitfire cockpit access door with a separately molded crowbar for easy painting. Designed for Revell’s Mk IX, but can be easily adapted to other Spitfires (Mk V through Mk 24) and Seafires as well.

Master patterns by Roy Sutherland

Price: $4.95
 

BR32339 Spitfire Mk IX Cockpit Snapshot Upgrade
BR32339 Spitfire Mk IX Cockpit Snapshot Upgrade

Details 

NEW! 1:32 Scale

This set features detailed port and starboard sidewalls, throttle and retract quadrants, stick, gunsight, compass, canopy latch, a sheet of decal cockpit stencils, a length of black wire to simulate the hydraulic lines on the stick and more. A quick and easy way to add a ton of detail to the cockpit in Revell’s new tool Spitfire Mk IX. Can be modified to fit other Spitfire kits.

Master patterns by Roy Sutherland

Price: $15.95
 

BR48317    Spitfire Four Slot Mainwheels
BR48317 Spitfire Four Slot Mainwheels

Details 

NEW! 1:48 Scale

This set contains a pair of detailed 4 slot mainwheels with accurate hub detail, subtle tire beading & data. The tyre is smooth; by far the most common tire seen on Spitfires. For Mk VII thru 21 Spitfires operation from grass or dirt runways. Also fitted to some Seafire kits. These wheels are designed to fit the superb Eduard Spitfire VIII, IX and XVI, but include axle adapter inserts so they can be fit to all other kits. Full 24" diameter (actual diameter .5" or 12.7mm).

Designed by Mike O'Hare.

Price: $7.50
 

BR48318    Spitfire Four Slot Block Tread Mainwheels
BR48318 Spitfire Four Slot Block Tread Mainwheels

Details 

NEW! 1:48 Scale

This set contains a pair of detailed 4 slot mainwheels with accurate hub detail, subtle tire beading & data. The tyre is block tread style (not Z-Block style). Fitted to postwar Mk VII thru 21 Spitfires operating from improved runways and carrier decks. Also installed on some Seafire XV, XVII, 45 and 46. These wheels are designed to fit the superb Eduard Spitfire VIII, IX and XVI,but include axle adapter inserts so they can be fit to all other kits. Full 24" diameter (actual diameter .5" or 12.7mm).

Designed by Mike O'Hare.

Price: $6.95
 

BR48330 P-40B/C Main Wheels with Smooth Tire
BR48330 P-40B/C Main Wheels with Smooth Tire

Details 

NEW! 1:48 Scale

This set consists of two super detailed resin main wheels with accurate hub and brake detail, petite tire logo and data detail, as fitted to the P-36, Hawk 81A. P-40B/C and RAF Tomahawk. A simple upgrade for for the Airfix, Monogram, Trumpeter and Bronco kits.

These wheels were also fitted to:
Curtiss Hawk 75
USAAC P-36 series fighters
Seversky P-35
Curtiss O-52 Owl
North American O-47
Curtiss P-37 (an interim prototype experiment)
XP-40 (modified from a P-36 airframe)
P-40E with smooth tread tires
Kittyhawk I/Ia with smooth tread tires

Master patterns by Gerry Mos

Price: $6.95
 

BR48355 FW 190A-1 through A-9, F, G  Exhausts
BR48355 FW 190A-1 through A-9, F, G Exhausts

Details 

NEW! 1:48 Scale

This kit contains two complete sets of deeply drilled out, thin walled engine exhaust stubs. Including starboard, port and undercowl exhaust stub banks. Designed for the new tool (2017) Eduard Fw 190 kits, but may be adapted for other 1/48 Fw 190 kits.

Master patterns by Roy Sutherland

Price: $7.95
 

« Previous | 1 | 2 | Next »

home | search | checkout | email

All text and graphics Copyright © 2017 Barracuda Studios, except where otherwise noted.