Welcome To BarracudaStudios
Acceptance Mark
Don’t have a PayPal account?
Want to pay by credit card?
No Problem!

Home » 1/32 Bf 109G-10 Sets

 Checkout

BC32144 Erla Bf 109G-10 - Part 1
BC32144 Erla Bf 109G-10 - Part 1

Details 

The Erla Bf 109G-10 was different from all other G-10s. Revell's new kit captures this variant for the first time in injection. This sheet contains seven very interesting and thoroughly researched aircraft with a surprising variety of schemes and markings. Anders Hjortsberg has done a vast amount of research into these aircraft, and the work shows in the superbly detailed profiles and accurately rendered decals. Printed by Cartograf, they are of the highest quality. Two full sets of stencils and national markings are included.
Price: $14.95
Out of Stock

BC32145 Erla Bf 109G-10 - Part 2
BC32145 Erla Bf 109G-10 - Part 2

Details 

The Erla Bf 109G-10 was different from all other G-10s. Revell's new kit captures this variant for the first time in injection. This sheet contains seven very interesting and thoroughly researched aircraft (including one very unique K-4) with a surprising variety of schemes and markings. Anders Hjortsberg has done a vast amount of research into these aircraft, and the work shows in the superbly detailed profiles and accurately rendered decals. Printed by Cartograf, they are of the highest quality. Two full sets of stencils and national markings are included.
Price: $14.95
Out of Stock

BR32123 Bf 109G-10 and K-4 Prop and Spinner
BR32123 Bf 109G-10 and K-4 Prop and Spinner

Details 

This set contains a new resin prop and spinner to replace the kit items in the Revell kit. Our resin spinner is more accurate in shape and detail. The misshapen kit blades are replaced with very accurate resin versions which will make a big improvement in the look of your finished model. Easy to install. Can be adapted to fit the Hasegawa and Trumpeter 109G-10 and K-4 kits.
Price: $10.95
 

BR32156 Bf 109G-10 Intake and Exhaust Set
BR32156 Bf 109G-10 Intake and Exhaust Set

Details 

This set contains a new seamless resin supercharger intake, separate hollow cooling scoops and accurate and detailed exhausts with recessed openings to replace the kit items in the Revell G-10. Filling the seams inside the intake is a tricky and time consuming process. We have saved you from having to do this less than thrilling task. This is a simple, easy to install upgrade that will make a big improvement in the look of your finished model. Can also be adapted for the Hasegawa and Trumpeter G-10 and K-4 kits.
Price: $9.95
 

BR32160 Bf 109G-10 and K-4 Oil Cooler Fairing
BR32160 Bf 109G-10 and K-4 Oil Cooler Fairing

Details 

This set contains one detailed, accurately shaped resin oil cooler fairing and separate exit flap that replaces the kit fairing. It is too slab sided on Revellís Bf 109G-10. Much study of photos was made in the preparation of this new set. A quick and easy drop fit replacement that will make your Erla G-10 even more accurate.
Price: $6.95
 

BR32168   Bf 109G Underwing Cannon Gunboats
BR32168 Bf 109G Underwing Cannon Gunboats

Details 

NEW! 1:32 Scale

This set consists of a pair of thoroughly researched and accurate underwing gunpods (kanoneboots) featuring turned brass barrels from the craftsman at Master Model in Poland. These pods are quick and easy to cleanup and install. The barrels can be added at the end of the build to eliminate the possibility of breakage. These 20mm cannon were a common fit to Gustavs of most variants. Master Pattern by Gunnar Jansson.

Price: $9.95
 

BR32169 Bf-109G Upperwings with Small Wheel Bulges
BR32169 Bf-109G Upperwings with Small Wheel Bulges

Details 

Resin inner upperwing sections with small wheel bulges to convert the Revell Bf 109G-10 wing (which only gives you the late wide tire bulge) for the many narrow wheel schemes. This section is also a correction for the G-6 kit, as the wheel bulges are molded incorrectly . The cross section of the bulge is reversed, with the high point of the bulge being inboard instead of outboard. This would prevent the tire from retracting into the gearbay. A fine distinction to be sure, but for 109 aficionados, we've done the hard work for you! a must have for many of the G-10 schemes on our two decal sheets.
Price: $12.95
 

BR32171  Bf 109G/K Prop and Spinner Alignment Jig
BR32171 Bf 109G/K Prop and Spinner Alignment Jig

Details 

This set contains a resin jig that will allow you to center drill the spinner from BR32122 Bf 109G-6 Prop and Spinner and BR32123 Bf-109G-10 Prop and Spinner. It also contains a blade alignment jig for the standard 109G-6 type prop blade as well as the wider paddle G-10 style blade. This set is cheap, easy to use and reusable! A must have for the dedicated Gustav and Kurfurst builder.
Price: $5.95
 

BR32223   Bf-109G-2 Thru G-10 Seat - No Belts
BR32223 Bf-109G-2 Thru G-10 Seat - No Belts

Details 

NEW! 1:32 Scale

Super detailed, accurate Bf 109G type seatpan & rear bulkhead to replace kit parts with molded-in belts in the recent Revell Germany Bf109G-6 and G-14 kits. The kits have a very rudimentary set of belts molded to the seat back and pan which are difficult to remove. Just add seatbelts of your choosing to complete the cockpit. A simple to install one piece casting. Master pattern by Mike Kirchoff.

Price: $7.95
 

BR32224  Bf-109G-2 Thru G-10 Seat with Belts
BR32224 Bf-109G-2 Thru G-10 Seat with Belts

Details 

NEW! 1:32 Scale

This set consists of a super detailed Bf 109G type seatpan & rear bulkhead with molded in harness to replace kit seat in Revell Germanyís 109G kits. The accurate molded in harness has strong relief and great detail, making it easy to paint. For those of you who don't enjoy fiddling with tiny brass belts or trying to feed even tinier buckles onto foil or fabric belts. Paint it up and your done! It may also be adapted to fit other kits. Master pattern by Mike Kirchoff and Roy Sutherland.

Price: $8.95
 


home | search | checkout | email

All text and graphics Copyright © 2017 Barracuda Studios, except where otherwise noted.